Wilderness Cruising | Nautitech Open 40 blog

I'm so thankful for our davits. On the Open 40 it means that raising and lowering the dingy with the 3:1 pulley setup is simple and can be done with minimal effort.  We are in our fourth year as liveaboards over 20,000 nm sailed. We have left our Highfield CL130 with Suzuki 9.9 outboard on the davits throughout. That's pretty good going, to think that we can prepare the dingy to cross an ocean in under three minutes.  Often overlooked when securing the dingy are the cleats placed specifically to stop sideways movement. It's horrible to see someone sailing along with the dingy crashing from side to side, when it is so simple to tie up.  To secure it from sideways movement:  Lift up the dingy, aim to get the dingy side tucked in right up to the bottom of the davits.  Take the painter to the cleat just behind the main sheet winch, and tighten the so that the side of the dingy presses firmly up against the back of the boat.  Take a line from the stern of the di...

This is our spinnaker, and how we sailed across the Pacific. When we bought the boat we didn't really know how to sail, we hadn't taken our day skipper, and were very much still beginner's. I have one video when we were still a light boat doing 10kts in the Solent. I turn to Fung and say " 10kts! We'll cross the Atlantic like this ".  It turns out we did cross the Atlantic, but not like that. We were the last boat in the final rally organised by Jimmy Cornell, we arrived dead last, and were so slow that our fellow cruisers wondered what happened to us. It didn't look that way when we departed Mindelo. After our first 36 hrs we were on for 200nm days. It wasn't to be, and after the katabatic winds left us we wound up almost a day behind the fleet. We didn't realise it at the time, but the boat was not yet ready for down wind sailing! As a catamaran, downwind should be what we excel at, and we do, but the thing that caught us out was lig...