Open 40 modifications

-

Cleats: base of mast, trampoline, transom

Non return values: engine bays and under stairs

Electronics: inverter breaker wiring, shunt bi basses

Owners door catch

Standing rig diamond chafe protection

Safety line backstay chafe protection

Running rigging for bauber haul lines

Reseal emergency tiller fitting

Saloon door height

Teak steps

Gale floor sanding

Comments

Post a Comment

Popular posts from this blog

To stop cruising

-
Image
Taking a sabatical Our life in the UK was really good. We lived in a leafy Surrey suburb, with an active local church, a farmers market, links to London, lots of social activities, and we had jobs we enjoyed. But after two decades of work we felt the need for a sabbatical. Our dream was to explore, and to sail. So we quit our jobs, bought a boat and set off for a life of world cruising.  What happened We knew we could travel for two years, but had no fixed destination, this was the extent of the plan. It turned out that we loved the lifestyle, and our 2 year sabbatical turned into 4. Every day on the water is different, and we accumulated many stories.  The Pandemic Ultimately we found ourselves in New Zealand, and were thrilled and relieved to arrive here. We were two years in and it felt like the end of our journey. We had seen more than we dreamed of, we made it across the Atlantic, and Pacific, sailing over 20,000 nautical miles, and visiting 17 countries. Sailing into Opu...
Read more

Fisherman: failed rescue

-
Image
I thought I'd learned my lesson, but it just will not stick.  Here's some of our tender exploits; jungle river exploration, lost in dingyy, lost the dinghy, rescued the dinghy, rescued another dinghy, caught speeding, soaked, swamped, flooded, starved, flipped on davits, floated away on tide, forgot to tie on, caught dingy painter in dinghy prop, caught dingy painter in yacht prop, hit a reef, hit a reef at night, dinghy drifting, dinghy drift snorkel, towed snorkel, towed boat to harbour, rescued yacht using the dinghy, and more... One of the lessons I thought I learned through all of this is, don't be a hero!  In the Marquesas, Nuku Hiva has the main port for cruisers. There is lots to see on other islands, but the access to town, plus the large protected harbour, means Nuku Hiva is one of the most popular spots for cruisers. The town has a wharf that locals and cruisers use to tie up. It's not uncommon to see 20 dinghies tied up. Sometimes dinghies can be three deep ...
Read more

Twilight rescue

-
Image
As a skipper, your number one concern is safey,  thinking always of saftey makes you think about others in distress, especially others on the water.  We have just made a monthly berth booking in Whangarei, New Zealand, and we didn't really expect to be doing any more boating adventures. When we were cruising, we often wound up in unexpected situations, but we thought this was all over after signing up for a long term berth. We decided it would be nice to go for a sail over the weekend and planed to go to Munro Bay, a favourite local anchorage, pretty and remote. There are hills, a farm, a reserve, and a couple of houses. Its shallow, good holding, muddy bottom, and good protection from North - NothEast winds. Also scallops and good fishing if you're a Kiwi.  Anyway, an hour out we heard a distress call from a boat in Paura Bay. This was sort of on the way, well its actually out of the way, but we did have to go passed the entrance. There's usually tons of boats there. The...
Read more

Seized bolts - Preventative Maintenance

-
Image
The marine enviroment is tough. Even on a new boat metals suffer from oxidation, corrosion, stress, electrolysis.  One particularly annoying task is dealing with seized bolts. So there are lots of ways to get seized bolts out. Overnight application or CRC Impact driver Persuasion Tapping Drilling Cutting a slot *Taps *Not much success with taps. Anyway, now that you have removed your bolt, I'm guessing that you do not feel like doing that again any time soon? Well, there is a simple and easy answer. Make sure you have a tube of Tefgel onboard.  If you have any concern about seized bolts, just coat the thread with Tefgel before you put it back. I've tried it, and it works well. So either buy and use this product on your threads, or get used to unseizing blots. About to replace old track stops, these bolts will get a Tefgel topup.
Read more